BQLGX - HVI 250 NEUTRAL TQ, 68034
- MSDS: BQLGX
- Manufacturer: SHELL OIL CO
- Product Name: HVI 250 NEUTRAL TQ, 68034
- National Stock Number: 9150-00N035736
Product Identification
Product ID:HVI 250 NEUTRAL TQ, 68034
MSDS Date:01/12/1988
FSC:9150
NIIN:00N035736
MSDS Number: BQLGX
Responsible Party
US
Emergency Phone: 713-473-9461;800-424-9300(CHEMTREC)
Info Phone: 713-241-4819
Cage: SHELO
Contractor
Telephone: 800-231-6950
Cage: 54527
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (MILD)
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: 100%
OSHA PEL 5 MG/M3 OIL MIST
ACGIH TLV: 5 MG/M3 OIL MIST
VESSELS.SOAK UP RESIDUE W/ABSORB SUCH AS CLAY,
RTECS: 9999999ZZ
WITH WATER TO REMOVE TRACE RESIDUE. SMALL SPILLS
RTECS: 9999999ZZ
OR OIL MIST MAY CAUSE MILD IRRIT OF MUC
RTECS: 9999999ZZ
PRODUCT TESTING PRODUCT IS CONSIDERED NO MORE THAN
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: BASED ON ESSNTLY SIMILAR PROD
TESTING PROD IS CONSIDERED PRACT NON-IRRIT TO EYES. SKIN: BASED ON
ESSNTLY SIMILAR PROD TESTING PROD IS CONSIDERED SLIGHTLY IRRIT TO
SKIN. PRLNGD & RPTD CONT MAY LEA D TO VARIOUS SKIN DISORDERS SUCH
AS DERM, OIL ACNE/FOLLICULITIS. INHAL: INHAL OF VAPS (GEN AT HIGH
TEMPS ONLY) (ING 4)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION AS NOTED ABOVE.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
First Aid
First Aid:EYE: FLUSH W/WATER FOR AT LST 15 MINUTES.IF IRRIT OCCURS, GET
MED ATTN. SKIN: REMOVE CONTAMD CLTHG & WIPE EXCESS OFF. WASH W/SOAP
& WATER/WATERLESS HAND CLEANER FOLLOWED BY SOAP & WATER.IF IRRIT
OCCUR S, GET MED ATTN. INHAL: REMOVE VICTIM TO FRESH AIR & PROVIDE
OXYGEN IF BRTHG IS DFCLT. GET MED ATTN. INGEST: DO NOT INDUCE
VOMIT.IN GEN NO TREATMENT IS NEC UNLESS LRG QTYS OF PROD ARE
INGEST. (SUPDAT)
Fire Fighting
Flash Point Method:PMCC
Flash Point:455F,235C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL FIRE EXPOSED CONTAINERS WITH WATER. DO
NOT USE DIRECT STREAM OF WATER.
Unusual Fire/Explosion Hazard:MATERIAL WILL NOT BURN UNLESS PREHEATED.
PRODUCT WILL FLOAT AND CAN BE REIGNITED ON SURFACE OF WATER.
Accidental Release
Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
CAUTIOUS JUDGMENT WHEN CLEANING UP LRG SPILLS.LRG SPILLS: WEAR RESP
& PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE TO DO SO.
DIKE & CONTAIN. REMOV E W/VACUUM TRUCKS/PUMP TO STORAGE/SALVAGE
(ING 2)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE WITH ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH WITH SOAP & WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
CONTAMINATED CLTHG BEFORE REUSE. PROPERLY DISPOSE OF CONTAMD
LEATHER ARTICLES, INCL S HOES, THAT CANNOT BE DECONTAMINATED.
Exposure Controls
Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUP EXPOSURE
LIMITS USE NIOSH/MSHA APPROVED RESP TO PREVENT OVEREXPOS. IN
ACCORDANCE WITH 29 CFR 1910.134 USE EITHER AN ATMOSPHERE SUPP RESP
OR AN AIR-PURIFYING RESP F OR ORGANIC VAPORS AND PARTICULATES.
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW EXPOSURE LIMITS .
Protective Gloves:NITRILE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE EATING, DRINKING,
SMOKING/USING TOILET FACILITIES. LAUNDER CONTAMD CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
HAZ DECOMP PRODS: GASES WILL EVOLVE WHEN MATL UNDERGOES
PYROLYSIS/COMBUST. CARBON MONOXIDE & OTHER UNIDENTIFIED ORG CMPDS
MAY BE FORMED UPON COMBUST. FIRST AID PROC: HOWEVER, GET MED
ADVICE. NOTE TO P HYS: IN GENERAL, EMESIS INDUCTION IS UNNEC IN
HIGH VISCOSITY, LOW VOLAT PRODUCTS, I.E., MOST OILS AND GREASES.
Chemical Properties
Boiling Pt:B.P. Text:>550F,>288C
Melt/Freeze Pt:M.P/F.P Text:5F,-15C
Spec Gravity:0.8844 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE LIQUID, SLIGHT HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT, OPEN FLAMES.
Hazardous Decomposition Products:THERM DECOMP PRODS ARE HIGHLY
DEPENDENT ON COMBUST CNDTNS. COMPLEX MIX OF AIRBORNE SOLID, LIQ,
PARTICULATES &(SUPP DATA)
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.